Tags:EnvironmentDelhi
For Prelims: Air Quality Index (AQI), Particulate Matter (PM2.5 and PM10), Central Pollution Control Board (CPCB), National Air Quality Index (NAQI)
For Mains: Environment: Air pollution and monitoring; Governance: Regulatory bodies and environmental policy
Source:The Hindu
5 facts for one-day exams
SSC, railway, police and teaching exams ask direct questions like these.
- CPCB is considering raising the PM monitoring cap from 1,000 µg/m³.
- The National Air Quality Index (NAQI) was introduced in 2015.
- AQI calculation requires data from at least three pollutants, including PM2.5 or PM10.
- Delhi's AQI on the reported day was 299 (poor category).
- Delhi has 59 air quality monitoring stations; 46 are run by DPCC.
The news
The Central Pollution Control Board (CPCB) on Tuesday said it was considering raising the upper limit for measuring particulate matter (PM) beyond the current cap of 1,000 micrograms per cubic metre (µg/m³), after air quality data from several government monitoring stations in Delhi went missing for hours during the pollution spike that followed Deepavali on Sunday. The data gaps led to an artificially lower official Air Quality Index (AQI), making air quality appear better than it actually was, according to experts.
In a statement, the CPCB explained that PM analysers deployed when the National Air Quality Index (NAQI) was introduced in 2015 were calibrated for a range of 0-1,000 µg/m³, and the automated data validation system treats hourly readings beyond that range as outside range, excluding them from AQI computation. During extreme episodes such as Diwali firecracker bursting, this can appear as a data gap at the affected station, and those hours do not contribute to the 24-hour average. The CPCB said internal deliberations and consultations on processing data beyond the system design range were under way. An official told The Hindu that while equipment had improved over time, the methodology had never been updated. Of Delhi's 59 air quality monitoring stations, 46 are operated by the Delhi Pollution Control Committee (DPCC), which records raw PM data but does not calculate the AQI; the CPCB uses data from all stations to compute the index.
Why in the news?
The CPCB has indicated it may raise the PM measurement cap after readings from Delhi monitoring stations went blank on Deepavali night, exposing a flaw in the NAQI methodology that has not been updated since 2015 despite better equipment.
Which law empowers the CPCB to set air quality standards?
The Central Pollution Control Board was constituted in 1974 under the Water (Prevention and Control of Pollution) Act, 1974. Its mandate was later extended to air pollution under the Air (Prevention and Control of Pollution) Act, 1981, which empowers the CPCB to lay down standards for air quality and to coordinate the activities of state pollution control boards. The National Air Quality Index was launched in 2015 as a communication tool to convert complex pollutant data into a single colour-coded value for public understanding. The Environment (Protection) Act, 1986 provides the umbrella framework under which ambient air quality standards and related rules are notified by the central government.
How does the current AQI methodology work?
The National Air Quality Index (NAQI) was launched in 2015 by the CPCB to provide a simplified, real-time measure of air quality. It is based on eight parameters, and the overall index is calculated only if data are available for a minimum of three pollutants, out of which one must be either PM2.5 or PM10. The monitoring instruments at that time were calibrated for a range of 0-1,000 µg/m³, and the automated validation system was designed to reject readings beyond this range. The CPCB has stated that the NAQI recognises prolonged exposure, rather than a momentary reading, as a more relevant indicator of health effects.
What did the data gap reveal and what is being considered?
The data gap on Deepavali night exposed a systemic flaw: during episodic pollution spikes, peak values are lost, leading to an artificially lower AQI that misrepresents the actual health risk. The CPCB has admitted that internal deliberations are under way to process data beyond the system design range. An official said the methodology was formed in 2015 when accuracy was considered good only up to 1,000 µg/m³, but equipment has since improved and discussions are now on to raise the cap so that peak values above 1,000 µg/m³ could be measured. Meanwhile, Delhi's air quality improved to the 'poor' category on Tuesday, with the 24-hour average AQI recorded at 299, just below the 'very poor' threshold of 301; experts attributed the improvement to increased wind speeds.
Facts and terms for exams
- Air Quality Index (AQI):
- A numerical index used by government agencies to communicate to the public how polluted the air currently is or how polluted it is forecast to become. It is calculated based on concentrations of major pollutants like PM2.5, PM10, NO₂, SO₂, CO, O₃, NH₃, and Pb.
- Particulate Matter (PM2.5 and PM10):
- Fine inhalable particles with diameters of 2.5 micrometres or less and 10 micrometres or less, respectively. PM2.5 can penetrate deep into the lungs and enter the bloodstream, causing severe health effects.
- Central Pollution Control Board (CPCB):
- A statutory organisation under the Ministry of Environment, Forest and Climate Change, responsible for monitoring and controlling pollution in India. It coordinates with State Pollution Control Boards.
- National Air Quality Index (NAQI):
- Launched in 2015 by the CPCB, it provides a single number (0-500) to represent overall air quality. It is calculated using eight pollutants and requires data from at least three, including PM2.5 or PM10.
Why it matters for exams
Syllabus: Environment: Air pollution and monitoring; Governance: Regulatory bodies and environmental policy
Common mistake: Examiners may swap the AQI calculation requirement: it requires data for a minimum of three pollutants, at least one of which must be PM2.5 or PM10. Also, the cap of 1,000 µg/m³ applies to both PM2.5 and PM10, not just one.
Mains question
The data gap in Delhi's AQI during Deepavali highlights a limitation in the NAQI methodology. Critically evaluate the need for updating pollution monitoring frameworks to reflect actual health risks.
Stuck? Get it in one tap
The CPCB measures PM (tiny particles that pollute the air) up to a maximum of 1,000 micrograms per cubic metre. On Deepavali night, actual PM levels were higher than that, so the automated validation system excluded those readings from the calculation. This made the official AQI look better than the real air quality. Now the CPCB is thinking of raising that cap so future peak pollution is captured correctly.
- Environment: Air pollution and monitoring
- Governance: Regulatory bodies and environmental policy
Related concepts: Air Quality Index (AQI), Particulate Matter (PM2.5 and PM10), Central Pollution Control Board (CPCB), National Air Quality Index (NAQI)
Practice questions
Pick an answer, then read the explanation.
- Q1Easy
Which body is responsible for calculating the Air Quality Index (AQI) in Delhi?
Explanation: The CPCB calculates the AQI using data from all monitoring stations, including the 46 operated by DPCC. DPCC records raw PM data but does not compute the AQI. The Ministry of Environment oversees CPCB but does not directly calculate AQI. The IMD provides weather data, not AQI.
- Q2Hard
Consider the following statements regarding air quality monitoring in India:
- 1.The National Air Quality Index was introduced in 2016.
- 2.The Delhi Pollution Control Committee operates 59 air quality monitoring stations in Delhi.
- 3.The current particulate matter measurement cap is 1,000 µg/m³, and hourly readings above this range are excluded from AQI computation.
Which of the statements given above is/are correct?
Explanation: 1. False: The NAQI was introduced in 2015. 2. False: The DPCC operates 46 stations in Delhi. 3. True: Readings beyond 1,000 µg/m³ are excluded from AQI computation.
- Q3Easy
What was the 24-hour average AQI recorded in Delhi on Tuesday after Deepavali?
Explanation: Delhi's AQI improved to 299 on Tuesday, just below the 'very poor' threshold of 301. 301 is the threshold, not the recorded value.
- Q4Medium
What is the primary consequence of the CPCB's current monitoring cap of 1,000 µg/m³ for PM during extreme pollution events?
Explanation: When PM levels exceed 1,000 µg/m³, the automated system discards those readings, so they do not contribute to the 24-hour average AQI. This results in a lower index value than actual pollution levels, misrepresenting health risks. The cap is a technical limitation, not a deliberate policy to manage public perception.
Frequently asked questions
1. Why did Delhi's AQI readings go blank on Deepavali night?
PM concentrations exceeded the 1,000 µg/m³ monitoring cap, and the automated system discarded those readings as out of range, causing data gaps.
2. What is the current monitoring cap for PM in AQI calculation?
The cap is 1,000 micrograms per cubic metre (µg/m³) for both PM2.5 and PM10.
3. Which body calculates the Air Quality Index in Delhi?
The Central Pollution Control Board (CPCB) calculates the AQI using data from all monitoring stations, including those operated by the Delhi Pollution Control Committee (DPCC).
All sources
Original11 November 2026 · Read story


