Tags:Economy
Source:Indian Express
Subject: Indian Economy: Industrial Growth, Manufacturing, Budgeting and Public Finance
Key points for Prelims: Long-Term Capital Gains (LTCG) tax, Production-Linked Incentive (PLI) scheme, Weighted deduction for R&D, Development Finance Framework for Manufacturing, Basis points (cost of borrowing), Public capital expenditure
Mains syllabus mapping
- General Studies Paper 3: Indian economy: industrial policy, manufacturing sector growth, budgeting, fiscal policy, capital expenditure, taxation, R&D and innovation incentives, credit and development finance
- General Studies Paper 2: Government policies and interventions: role of pre-budget consultations and industry bodies in policy making
Key facts for one-day exams
- CII submitted 365 proposals during the pre-budget consultations.
- FICCI proposed a Development Finance Framework for Manufacturing.
- ASSOCHAM recommended a dedicated production-linked incentive scheme for robotics.
- CII proposed verifying additional net employment through Employees' Provident Fund Organisation records.
- ASSOCHAM recalled a historical 200% weighted deduction for research and development.
Budget 2027 manufacturing proposals: why in the news?
Industry bodies presented their Budget 2027 wish list to Finance Minister Nirmala Sitharaman during pre-budget consultations, proposing a 25% manufacturing GDP share, R&D incentives, and a development finance framework, making it a key input for the upcoming Union Budget.
Industry bodies presented a set of proposals for the manufacturing sector to Union Finance Minister Nirmala Sitharaman during the third pre-budget consultation on Tuesday. The suggestions included targeted tax incentives, a focus on research and development (R&D), support for the circular economy, sops for incremental job creation, especially for women workers, duty rationalisation on raw material imports, and a dedicated development finance framework.
The Federation of Indian Chambers of Commerce and Industry (FICCI) called for rationalisation of the Long-Term Capital Gains (LTCG) tax on listed securities, citing concerns over substantial foreign investment outflows earlier this year. FICCI also proposed a 'Development Finance Framework for Manufacturing' with dedicated capital support and credit-enhancement mechanisms. FICCI President Anant Goenka said that scaling up India's manufacturing to 25% of the GDP may require over ₹100 lakh crore in incremental credit over the next decade, and noted that the cost of borrowing in India is nearly 400 to 500 basis points higher than in peer countries such as China and South Korea.
The Confederation of Indian Industry (CII) submitted 365 proposals, including 64 economic policy proposals, advocating targeted, time-bound tax measures that reward additional economic activity. CII President R Mukundan said fiscal discipline of 4% of GDP should be maintained and public capital expenditure of 3% of GDP should continue, which would add ₹50,000 crore to spending. He also called for a capability-linked support programme for critical components, machine tools, dies and moulds, with special attention to MSME modernisation. The Associated Chambers of Commerce and Industry of India (ASSOCHAM) recommended a dedicated production-linked incentive (PLI) scheme for robotics, automation equipment, sensors and precision components, and the re-introduction of R&D-related weighted deduction, which historically stood at 200%.
What was the 200% R&D weighted deduction?
The 200 per cent weighted deduction on R&D expenditure was provided under Section 35(2AB) of the Income-tax Act, 1961. Section 115BAB was inserted by the Taxation Laws (Amendment) Act, 2019.
What tax and employment proposals were made?
CII proposed accelerated depreciation on new plant and machinery, a higher weighted deduction for incremental R&D spending, and a limited-period corporate tax benefit for companies that create additional net employment, verified through Employees' Provident Fund Organisation (EPFO) records. FICCI sought a reduction in LTCG tax on listed securities or allowing foreign investors to compute capital gains in the currency of their original investment. ASSOCHAM recommended reintroducing enhanced R&D incentives, including 200% weighted tax deductions, 100% deductions on eligible capital expenditure, tax benefits for industry-academia collaboration, customs duty exemptions on scientific equipment, accelerated depreciation, and tax holidays for eligible R&D companies.
What was proposed for MSMEs?
For micro, small and medium enterprises (MSMEs), industry leaders suggested targeted fiscal incentives for machinery modernisation, technology upgradation, industrial clusters, quality certification and export promotion. They also proposed lowering operating costs through affordable credit, rationalised customs duties, simplified compliance, reduced logistics expenses, easier industrial land access, and removal of inverted duty structures to improve profitability, productivity, investment and long-term business sustainability.
Key terms
- Weighted tax deduction:
- A tax deduction calculated as a specified multiple of eligible expenditure, rather than necessarily the actual amount spent.
- Credit enhancement:
- A mechanism that improves the credit quality of a borrower or financing instrument, potentially making finance more accessible.
- Inverted duty structure:
- A tariff situation in which duties on inputs are higher than duties on the corresponding finished products.
- Basis point:
- One basis point equals one-hundredth of a percentage point.
Budget 2027 manufacturing proposals: why it matters for exams
Syllabus: Economy: Industrial policy and manufacturing; Economy: Fiscal policy and public investment
Common mistake: Examiners may present the proposed 25% manufacturing share as an achieved figure; it is a suggested objective, not an achievement.
Mains practice questions
Question 1(GS-3 | 250 words | 15 marks)
Industry bodies have urged the government to raise the manufacturing share of GDP to 25% through tax incentives, R&D support and a dedicated development finance framework. Critically examine the constraints on India's manufacturing growth and evaluate whether such measures can deliver the target without compromising fiscal discipline.
Answer outline
- Introduction: Open by noting that the manufacturing sector's target of 25% of GDP, pressed during Budget 2027 pre-consultations, depends on finance, technology and fiscal space, and that the aim must be weighed against India's fiscal commitments.
- Body:
- Constraints: high cost of borrowing relative to peer economies such as China and South Korea, which raises the cost of capital for manufacturers and limits investment.
- Finance need: the scale of incremental credit required, which justifies a development finance framework with capital support and credit-enhancement mechanisms.
- Tax and incentive measures: rationalising LTCG tax on listed securities to address capital outflows, reviving weighted R&D deductions, and PLI-type support for robotics, automation and precision components.
- Fiscal discipline: maintaining the fiscal deficit target of 4% of GDP and public capital expenditure of 3% of GDP, which limits the scope for large revenue concessions.
- Targeted versus broad-based incentives: time-bound, capability-linked support for MSMEs and critical components is more viable than blanket tax sops.
- Conclusion: A balanced way forward combines targeted, time-bound incentives and credit-enhancement tools with sustained public capex and fiscal prudence, so that the manufacturing push is growth-oriented without eroding macroeconomic stability.
Question 2(GS-3 | 150 words | 10 marks)
Suggestions for Budget 2027 include incentives for job creation, especially for women workers, and support for the circular economy alongside manufacturing growth. Discuss how industrial policy can balance employment generation, sustainability and competitiveness.
Answer outline
- Introduction: Note that the manufacturing wish list pairs output targets with employment and sustainability goals, so industrial policy must serve all three together.
- Body:
- Employment: incremental job-linked incentives, particularly for women workers, can make manufacturing growth more inclusive and address labour-intensive job creation.
- Circular economy: support for recycling and resource efficiency reduces raw material dependence and environmental costs, aligning growth with sustainability.
- Competitiveness: duty rationalisation on raw material imports lowers input costs, while R&D and automation support improve productivity and global competitiveness.
- Trade-offs: automation may reduce labour intensity, so incentives must be designed to protect employment outcomes.
- Conclusion: Industrial policy works best when incentives are conditional on job creation and sustainable practices, ensuring that competitiveness gains translate into inclusive and environmentally sound growth.
Stuck? Get it in one tap
Industry bodies have suggested tax and finance measures for manufacturing before Budget 2027; these are proposals, not approved policies. Long-tenor finance means credit available for a long period. The proposals also seek support for research, machinery upgrades and additional jobs.
- Economy: Industrial policy and manufacturing
- Economy: Fiscal policy and public investment
Related concepts: Weighted tax deduction, Credit enhancement, Inverted duty structure, Basis point
Practice questions
Pick an answer, then read the explanation.
- Q1Hard
Consider the following statements about the Budget 2027 manufacturing proposals:
- 1. CII proposed a limited-period corporate tax benefit for verified net additional employment.
- 2. ASSOCHAM proposed a dedicated production-linked incentive scheme for robotics and related technologies.
- 3. FICCI proposed increasing long-term capital gains tax on listed securities.
Which of the statements given above is/are correct?
Explanation: Statements 1 and 2 are correct: CII proposed an employment-linked benefit, while ASSOCHAM proposed a robotics incentive scheme. Statement 3 is incorrect because FICCI sought a reduction or an alternative method of computing gains for foreign investors.
- Q2Medium
How many total proposals did CII submit during the Budget 2027 consultations?
Explanation: CII submitted 365 proposals, including 64 economic policy proposals. The other totals do not match its submission.
- Q3Medium
What is the principal purpose of FICCI's proposed Development Finance Framework for Manufacturing?
Explanation: FICCI proposed capital support and credit enhancement to improve long-tenor financing for manufacturers. Research deductions and employment verification were separate tax-related proposals, not the framework's principal purpose.
Frequently asked questions
1. What manufacturing share of GDP did industry bodies propose for Budget 2027?
Industry proposals sought to raise manufacturing's share to 25% of GDP.
2. How much incremental credit did FICCI estimate for manufacturing growth?
FICCI estimated that over ₹100 lakh crore may be required over the next decade.
3. What robotics incentive did ASSOCHAM propose?
ASSOCHAM recommended a dedicated production-linked incentive scheme for robotics, automation equipment, sensors and precision components.
4. What capital gains tax change did FICCI suggest?
FICCI sought a reduction in long-term capital gains tax on listed securities or currency-based computation of gains for foreign investors.
All sources
Original17 November 2026 · Read story


