Super Current Affairs

Science & Tech

CSIR Technology Transfers: 100% Recycled Aggregates, Up to 40% Reclaimed Asphalt

19 November 20264 min1 source3 questionsStory 32 of 42
Full backgroundEverything covered at a glance

Source:PIBPIB

Subject: Science and Technology: Indigenous R&D, Technology Transfer and Sustainable Infrastructure

Key points for Prelims: CSIR, Reclaimed asphalt pavement (RAP), MicroReAct-RAP, Bio-Bitumen, Ultra-High-Performance Concrete (UHPC), Recycled aggregates

Mains syllabus mapping

  • General Studies Paper 3: Science and technology: indigenization of technology, developments and their applications; Infrastructure: roads, sustainable construction; Environment: waste management and recycling
  • General Studies Paper 2: Government policies and interventions for development in key sectors; Ministry of Science and Technology and its institutions
Council of Scientific and Industrial Research
Image: Manik Shaha, CC BY-SA 4.0, Wikimedia Commons

Key facts for one-day exams

  • CSIR's recycled construction products use 100% recycled aggregates.
  • MicroReAct-RAP incorporates up to 40% reclaimed asphalt pavement.
  • CSIR-CRRI and CSIR-IIP collaborated on Bio-Bitumen.
  • IFAB Global received the Emergency Retrieval System for Power Lines.
  • Pārakhi Skill Systems Private Limited is based in Patna.

CSIR technology transfer to industry: why in the news?

CSIR transferred multiple indigenous technologies to industry partners at a single event, including construction products using 100% recycled aggregates and a road-surfacing solution incorporating up to 40% reclaimed asphalt pavement, marking a push to commercialise sustainable infrastructure technologies.

The Council of Scientific and Industrial Research (CSIR) transferred indigenous technologies to industry partners at a Technology Transfer and MoU signing event held at CSIR Headquarters in New Delhi. The event, part of CSIR's monthly technology transfer initiative, was chaired by Dr N. Kalaiselvi, Secretary of the Department of Scientific and Industrial Research and Director General of CSIR. Technologies from CSIR-Structural Engineering Research Centre (CSIR-SERC), Chennai; CSIR-Central Road Research Institute (CSIR-CRRI), New Delhi; CSIR-Advanced Materials and Processes Research Institute (CSIR-AMPRI), Bhopal; and CSIR-Indian Institute of Petroleum (CSIR-IIP), Dehradun were transferred to industry partners.

CSIR-SERC transferred three technologies. The Emergency Retrieval System for Power Lines, a lightweight modular system for rapid restoration of electricity transmission lines, was transferred to M/s IFAB Global. Recycled Aggregate-based Eco-friendly bricks, Hollow Blocks and Paver Blocks, which use 100% recycled aggregates and industrial waste, were transferred to the National Automotive Test Tracks (NATRAX). Ultra-High-Performance Concrete (UHPC) Pavement Technology, offering high strength and durability, was also transferred to NATRAX for pilot-scale field implementation.

CSIR-CRRI transferred the MicroReAct-RAP technology, a sustainable cold micro-surfacing solution incorporating up to 40% reclaimed asphalt pavement (RAP), to three industry partners: Innovative Roadztech Private Limited, Delhi; AVK BlackGold Infra Private Limited, Surat; and Hindustan Colas Private Limited (HINCOL), Mumbai. The Bio-Bitumen technology, developed with CSIR-IIP, which converts agricultural residues including rice straw into a biomass-derived material that can partially replace petroleum-based bitumen, was transferred to RAACS Solutions Private Limited, Bihar (BioBhoomi), and SAR Parivahan Private Limited, Kolkata.

CSIR-CRRI also signed two Memoranda of Understanding. The first was with the Global Automotive Research Centre (GARC), Tamil Nadu, under the National Automotive Board, Ministry of Heavy Industries, for collaboration in joint R&D, shared testing facilities, technical projects, seminars and academic exchanges. The second was with Pārakhi Skill Systems Private Limited, Patna, for collaborative research in driver risk assessment, cognitive and psychomotor evaluation, field trials, research publications and related technology deployment.

Key features and how it works

  • CSIR runs a monthly technology transfer (ToT) initiative in which laboratory technologies are transferred to industry partners, often with MoUs signed at the same event.PIB
  • At CSIR Headquarters in New Delhi, technologies developed by CSIR-SERC and through collaboration among CSIR-CRRI, CSIR-AMPRI and CSIR-IIP were transferred to industry partners.PIB
  • CSIR-SERC transferred the Emergency Retrieval System for Power Lines to M/s IFAB Global, a lightweight modular system for rapid restoration of transmission lines after failures.PIB
  • CSIR-SERC transferred recycled aggregate eco-friendly bricks, hollow blocks and paver blocks, made with 100% recycled aggregates and industrial waste, to NATRAX.PIB
  • CSIR-CRRI transferred MicroReAct-RAP, a sustainable cold micro-surfacing solution with up to 40% reclaimed asphalt pavement, to three industry partners: Innovative Roadztech (Delhi), AVK BlackGold Infra (Surat) and Hindustan Colas (Mumbai).PIB
  • The Bio-Bitumen technology, developed with CSIR-IIP, converts agricultural residues such as rice straw into a biomass-derived material that can partially replace petroleum-based bitumen. It was transferred to RAACS Solutions (Bihar) and SAR Parivahan (Kolkata).PIB

Related Static GK and comparison

  • Department of Scientific and Industrial Research (DSIR): the parent department under the Ministry of Science and Technology; CSIR operates under its aegis, and the CSIR Director General is also DSIR Secretary.
  • Board of Scientific and Industrial Research (BSIR): created on 1 April 1940 as a two-year body, with Arcot Ramasamy Mudaliar as chairman; its advisory role was later folded into CSIR's governing structure.
  • Central Road Research Institute (CRRI): a constituent CSIR laboratory established in 1952, located on Mathura Road, Okhla, New Delhi, working on roads, runways and utilisation of industrial waste in road construction.
  • Societies Registration Act, 1860: the law under which CSIR operates as an autonomous society.

Achievements

  • CSIR was awarded the National Intellectual Property (IP) Award 2018 in the category Top R&D Institution / Organisation for Patents and Commercialisation.
  • CSIR has a patent portfolio of 1,132 unique patents in force, of which 140 have been commercialised, and it filed about 250 Indian and 213 foreign patents during 2022-23.csir.res.in
  • A CSIR technology transfer event moved technologies including MicroReAct-RAP to industry, demonstrating work on sustainable road construction materials.PIB

Challenges

  1. CSIR's figures show that 140 of its 1,132 unique in-force patents have been commercialised.csir.res.in
  2. Technologies that are ready at pilot scale, such as UHPC pavement sent for field implementation, need field trials and funding before industry adopts them widely.
  3. Industrial waste and recycled materials need reliable quality standards and buyer confidence before large-scale use in construction, which can slow adoption.

Way forward

  • Track outcomes of each technology transfer, such as licences taken, products sold and pilot sites completed, not only the number of MoUs signed.
  • Provide handholding to small industry partners for scale-up, testing and certification of new materials.
  • Strengthen convergence with user ministries and agencies, such as road and automotive bodies, so that transferred technologies get a ready market and field trials.

Connected to this news

Council of Scientific and Industrial Research

CSIR is India's publicly funded research and development organisation, headquartered in New Delhi, that works to promote scientific, industrial and economic growth and transfers its indigenous technologies to industry.

Timeline

  1. 19 November 2026This story

    CSIR transferred several indigenous technologies to industry partners at a single New Delhi event, including recycled-aggregate construction products and a road-surfacing solution using up to 40% reclaimed asphalt pavement, and signed two research MoUs with CSIR-CRRI.

  2. 2018

    CSIR receives the National Intellectual Property Award 2018 for Top R&D Institution for Patents and Commercialisation.

  3. 1943

    Governing body approves the proposal to establish five national laboratories, including the National Chemical Laboratory, National Physical Laboratory and National Metallurgical Laboratory.

  4. 26 September 1942

    CSIR comes into operation as an autonomous body; BSIR and IRUC become advisory bodies to its governing body.

  5. 14 November 1941

    Central Assembly accepts the proposal for an Industrial Research Fund, giving an annual grant for five years.

  6. 1 April 1940

    Board of Scientific and Industrial Research (BSIR) is created for a period of two years, with Arcot Ramasamy Mudaliar as chairman.

See the full timeline (7 events)
Read the full background

Key terms

Technology transfer:
Technology transfer is the sharing or transfer of a technology from its developer to another organisation for use or commercialisation.
Circular economy:
A circular economy seeks to retain materials in use through practices such as reuse and recycling, reducing waste and demand for new resources.
Reclaimed asphalt pavement:
Reclaimed asphalt pavement is material recovered from existing asphalt pavements for potential reuse in road construction.
Bitumen:
Bitumen is a binding material commonly used in road construction; conventional bitumen is petroleum-based.

CSIR technology transfer to industry: why it matters for exams

Syllabus: Science and Technology: Indigenous technology and research institutions; Environment: Waste management and circular economy

Common mistake: Examiners may present Bio-Bitumen as a complete replacement for petroleum-based bitumen; it can partially replace conventional bitumen.

Mains practice questions

Question 1(GS-3 | 250 words | 15 marks)

Technology transfer from public R&D institutions to industry is key to converting laboratory innovations into socio-economic value. Critically examine the challenges that impede the commercialisation of indigenous research in India and suggest measures to strengthen the science-industry interface, with reference to recent initiatives of CSIR.

Answer outline

  • Introduction: Open by noting that CSIR transferred several indigenous technologies, such as MicroReAct-RAP and Bio-Bitumen, to industry partners at a single event, showing a push to commercialise public R&D.
  • Body:
    • Gap between lab-scale prototypes and pilot or field-scale implementation, illustrated by NATRAX pilot-scale UHPC pavement deployment
    • Limited industry absorptive capacity and the risk aversion of firms toward new materials in infrastructure
    • Weak intellectual property management, licensing frameworks and incentives for scientists
    • Regulatory and standards hurdles for new construction materials, such as bitumen substitutes and recycled aggregates
    • Role of MoUs for joint R&D, shared testing facilities and academic exchange, as with GARC and Pārakhi Skill Systems
  • Conclusion: Balanced way forward: strengthen pilot-testing infrastructure, standardise certification for green construction materials, and reward scientists for commercialisation so that technology transfer becomes sustained rather than episodic.

Question 2(GS-3 | 150 words | 10 marks)

Sustainable infrastructure requires shifting from virgin raw materials to circular-economy solutions. Discuss how recycled aggregates, reclaimed asphalt pavement and bio-based bitumen can contribute to environmentally sustainable road and construction development in India, and evaluate the challenges in their large-scale adoption.

Answer outline

  • Introduction: Link the CSIR transfers to the wider need for circular-economy construction, citing 100% recycled aggregates and up to 40% reclaimed asphalt in new products.
  • Body:
    • Environmental benefits: reduced quarrying, lower construction waste and fewer virgin petroleum inputs
    • Bio-bitumen from agricultural residues such as rice straw addresses crop-residue burning and dependence on petroleum-based bitumen
    • Challenges: quality assurance, consistent supply of waste inputs, performance validation and cost competitiveness
    • Need for codified standards and procurement norms in public road projects
  • Conclusion: Adoption will succeed if technical standards, pilot validation and incentives for recycled inputs advance together, making sustainable infrastructure both viable and scalable.

Stuck? Get it in one tap

Practice questions

Pick an answer, then read the explanation.

  1. Q1Easy

    Which CSIR laboratory collaborated with CSIR-Indian Institute of Petroleum on Bio-Bitumen?

  2. Q2Hard

    Consider the following statements about CSIR technologies:

    • 1. MicroReAct-RAP incorporates up to 40% reclaimed asphalt pavement.
    • 2. Bio-Bitumen can partially replace petroleum-based bitumen.
    • 3. The Emergency Retrieval System is intended for rapid restoration of power transmission lines.

    Which of the statements given above are correct?

  3. Q3Medium

    What is the primary resource-use benefit of CSIR's recycled aggregate-based construction products?

Frequently asked questions

1. What is CSIR's MicroReAct-RAP technology?

MicroReAct-RAP is a cold micro-surfacing solution incorporating up to 40% reclaimed asphalt pavement.

2. What agricultural material can be used to produce CSIR's Bio-Bitumen?

Rice straw, also called parali, is among the agricultural residues used to produce Bio-Bitumen.

3. Which CSIR technology helps restore power transmission lines?

The Emergency Retrieval System for Power Lines is a lightweight, modular system designed for rapid restoration after disruptions.

4. Where will CSIR's Ultra-High-Performance Concrete pavement be tested?

The National Automotive Test Tracks received the technology for pilot-scale field implementation.

All sources

Stories from the last 30 days on the same topic, state or exams

Science & Tech

CSIR-NML transfers lithium-ion battery recycling technology

  • Full form of CSIR: Council of Scientific and Industrial Research
  • Full form of NML: National Metallurgical Laboratory
Background GK: Circular economyNodal: CSIR-National Metallurgical LaboratoryDon't make this mistake!
3 questions · 3 minHindustan
EnvironmentUPSC: Important

Medicinal plant project covers 16 tribal hotspots

  • Nodal ministry: Ministry of Tribal Affairs
  • Scientific partner: Council of Scientific and Industrial Research-National Botanical Research Institute, Lucknow
Background GK: GermplasmNodal: Ministry of Tribal AffairsDon't make this mistake!
4 questions · 4 minPIB
PolityDelhiUPSC: Important

SC allows green crackers in Delhi-NCR on Nov 7-8 with strict timings

  • Full form of CSIR-NEERI: Council of Scientific & Industrial Research - National Environmental Engineering Research Institute
  • Full form of PESO: Petroleum and Explosives Safety Organisation
New updateBackground GK: Air Quality Index (AQI)Banned substance: bariumNodal: CSIR-NEERIDon't make this mistake!
4 questions · 2 minIndian ExpressHindustanThe Hindu
Science & Tech

India-Norway dialogue on waste-to-resource in construction sector

  • Event: India-Norway Dialogue on 'Waste to Resource Solutions in the Cement and Construction Sector'
  • Date: 10 November 2026
Background GK: Circular EconomyStockholm Convention; CDW Rules 2025Nodal: Council of Scientific and Industrial Research (CSIR)Don't make this mistake!
4 questions · 2 minPIB
Science & TechUttar PradeshRailway: Important

IIT Kanpur: CoE for indigenous railway coach & bogie design

  • Proposed Institution: Centre of Excellence for Rolling Stock and Bogie Design
  • Nodal Body (Railways Research): Research Designs and Standards Organisation (RDSO)
Background GK: Centre of Excellence (CoE)Nodal: Indian Railways / RDSODon't make this mistake!
4 questions · 2 minHindustan